Alpine water

Filtration

Alpine® uses Feel Well® filters which are tested and certified by WQA under ANSI/NSF Standards 42, 43 & 58.  Independent testing and certification ensures our systems are of the highest integrity level allowing our customers to rest assured the water they drink is clean, fresh and safe.

Reverse Osmosis Filtration

Why RO?

RO is needed in areas with high total dissolved solids (TDS) in the source water. These areas are primarily located in western and southwestern states where the water source comes from aquifers vs. ground water i.e. lakes and rivers.

What is RO?

RO systems are either a 3- or 4- stage system depending on the holding tank.

  1. The first stage is a 5 micron Sediment filter that traps particulate matter like dirt, rust and silt.
  2. The second stage is a 5 micron Carbon Block filter reducing chlorine and other materials that cause bad taste and odors (pre-filter)
  3. The third stage is the heart of the RO system or the Membrane. This 50 gpd semi permeable membrane removes TDS, Sodium, Percolate, Chromium, Arsenic, Copper and Lead. It also removes cysts such as Giardia and Cryptosporidium together with Nitrates and Nitrites.
  4. The fourth stage is needed to clean the water after it passes through the holding tank. If using a cooler with sufficient reservoir space no holding tank or fourth stage filter is needed.

Feel Well® Ultra™ Series

Submicron filtration with lead reduction

Feel Well® Ultra™ Series 1000 & 2000 Tested and certified by WQA under ANSI/NSF standards 42 & 53 for the reduction of:  (Extra Lead Reduction for old buildings)

  • Standard number 42 Aesthetics Effects
    - Chlorine reduction
    - Taste and Odor
  • Mechanical Filtration 
    - Normal Particulate Class I:
    - 97.9% reduction of particulates on-half micron and larger
  • Standard number 53 Health Effects 
    - Lead
    - Cyst
    - Asbestos

Feel Well® Premium Series

Feel Well® Premium™ Series 1500 & 3000 Tested and certified by WQA under ANSI/NSF standards 42 & 53 for the reduction of:  (Extra limescale removal protects equipment

  • Standard number 42 Aesthetics Effects
    - Chlorine reduction
    - Taste and Odor
  • Mechanical Filtration 
    - Normal Particulate Class I:
    - 97.9% reduction of particulates on-half micron and larger
  • Standard number 53 Health Effects 
    - Chemical Reduction - Lead
    - Mechanical Filtration -Cyst